Skip to Content

MSR cable glands At Sea

  • A 60 Lloyds certified
  • Pressure tested upto 5 bar
  • MED Modular B approved for use in cruise liners & passenger vessels
  • Each gland accommodates a range of cable diameters
  • No additional parts or on site machining required
  • Gland manufactured from stainless steel
  • Housing/body manufactured in electroplated mild steel
  • No welding required
5 Bar
5 Bar
A60 Lloyds
A60 Lloyds
No welding required
No welding required
MSR cable gland

The MSR glands are designed to seal up to 8 cables between 4 and 32 mm (0.16” and 1.26”) diameter.
And pipes between 4-30 mm.

The seal is easy to install. Just remove the center core and minimize the number of rings to enable cables to pass through. When all cables are inserted into the gland simply tighten the four Hex Screws equally. Once complete the seal will provide an effective barrier against fire, water, dust, vermin etc. No welding is required.

Dimensions in millimeter and inches. Weights in kilograms and Oz.
Alternative cable configurations can be manufactured to suit specific customer requirements.

Correct and safe installations

To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.

For more information, please view following instructions, videos or download manuals as PDFs.