Skip to Content

RGG-OK On land

 

  • Mounting gasket and hardware available

  • Applicable on core-drilled holes

  • Openable and retrofit

 

Bolted
Bolted
EI30-EI240
EI30-EI240
Nema 250
Nema 250
IP66/68
IP66/68

Overview

RGG-OK

  • Type approved cable transit for buildings
  • Can be casted in concrete
  • Assists cable management
  • Seals the penetration against the passage of fire, water, gas, sound and environmental hazards
  • Unlike other brands our system can be dismantled and re-used
  • Marked cable designation on blocks for increased safety
  • No adaptation of standard blocks needed

 

RGG-OK frame type can be bolted onto concrete, plaster board wall or casted into a concrete wall or floor to protect against flooding, water and ingress.

The transit is made of two angle bars 60x6 and two gables in galvanized mild steel.
The standard height varies with the sizes - 2, 4, 6 or 8 (internal width 120.5 ± 1). Can be installed in horizontal combinations.
Please see information drawings for detailed data.

RGG-OK have removable ends which enables installation where cables already have been pulled.

 

 

 

 

 

Standard frames in four different
sizes: 2, 4, 6 and 8 which mark
different heights.
All have the same
width.

Performance

Resistance to fire:
EI 30-60-120 & E 30-60-120-240 - EN 13501-2 (CE)
(Contact MCT Brattberg for application details)

Enclosure degree of protection Nema 250:
3R; 4X; 12 - Nema 250-1st

Enclosure degree of protection IP: 
IP65; IP66; IP67; IP68 2 meters 60 min - IEC 60529

 

Data

Trade name: 
MCT Brattberg RGG-O multi cable/pipe transit system

Variations: 
See Overview

Working temperature:
 -65 to +70 degrees C

Lycron data

Read Lycron data sheet:
Data sheet Lycron


Lycron is halogen free and flame retardant.

 

For all approvals, please also see Certificates 

Correct and safe installations

To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.

For more information, please view following instructions, videos or download manuals as PDFs.

Download pdf instructions

Instructions 1
Instructions 2
Instructions 3
How to install a MCT Brattberg RGS/RGB frame, vertical

Multiple frames

HORIZONTAL MULTIPLE FRAMES

Horizontal multiple frames are described by listing the frame type and size x the desired number of horizontal openings.
Designation (starting at bottom):
Frame type 6x4

Insert Blocks

Insertblock

Standard Block

Standard Block for a fast and safe installation.

Read more

Handiblock

Newly developed Insert Block that provides greater flexibility, simple and safe installation.

Read more

AddBlock

Eleven blocks and 66 dimensions.

Read more

U-Block

The U-Block is used to convert the external dimensions of Insert Blocks, AddBlocks and Spare Blocks to the next modular size.

Read more
Spare Block

Spareblock

The unused space in the frame is filled with solid spare blocks. Using the spare blocks allows the option of fitting new cable in the future.

Read more

Waveguides

Insert blocks for Waveguides

Read more

Components

STG Endpacking

Installed between compression plate and the top of the frame, completing the seal.

Read more

PTG Presswedge

The Presswedge compresses the system and completing the seal.

Read more

Stayplate

To be placed between each row of blocks.

Read more

Lubricant

MCT Brattberg Lubricant for easier and safer installation.

Read more

Installations

Examples of installations on different sites:

RGG Before After
BUSBAR SNCF 11B8
Henkel 06
Henkel 04
Henkel 02
INES Bagues 5
LMJ 03
RFI France 24 3
SANOFI V16 5
Storengy Chemery 12
Storengy Chemery 23
Storengy Chemery 45
Storengy Chemery 60
Storengy Chemery 71
Storengy Chemery 80
Multi Frame With Multipipe
DSC00048
Handiblock 12D8
Handiblock 12Db
RGG-OK
RGG-OK